This professional Flash Cure LED Lamp is a compact nail-curing device with dimensions 66mm×52mm×72mm, boasting 9W power, 5V/2A input and a dual wavelength of 365nm + 405nm for efficient gel nail curing.

For first use, charge the battery fully for at least 2 hours; recharge regularly if unused for 3 months to extend battery life. A red light indicates charging, turning green when full, while a flashing light means low battery (the lamp shuts off then). Charge via the supplied cable to any USB power source.

Operation is simple: apply gel, place the finger in the lamp’s recess, press the central touch button for 1 second to activate. It features a touch sensor—light stays on with contact and auto-shuts off after 30 seconds, or 5 minutes for the timer indicator. A mild warm nail sensation during curing is normal; just reposition the finger if needed.

Adhere to strict safety warnings: avoid direct eye/skin contact with LED light (rays cause irreversible damage), keep away from children/pets, use only indoors and in dry areas (no water/humidity). Remove jewelry before use and place on a flat surface.

Maintenance is hassle-free: clean the body with a soft damp cloth and LED bulbs with a dry one (no solvents); store in a dry, safe place. Do not open the device. Dispose of it at an electrical waste point, not in household trash, when faulty. It is for professional use only, not for those with limited physical/sensory/psychological capabilities.